wred
Configure a WRED profile for yellow or green traffic.
Z9500
Syntax
wred {yellow | green}
profile-name
To remove the WRED drop precedence, use the no wred {yellow | green} [
profile-
name]
command.
Parameters
yellow | green
Enter the keyword
yellow
for yellow traffic. A DSCP value of
xxx100, xxx101, and xxx110 maps to yellow.
Enter the keyword green for
green
traffic. A DSCP value of
xxx0xx maps to green.
profile-name
Enter your WRED profile name in character format (32
character maximum). Or use one of the five pre-defined
WRED profile names.
Pre-defined Profiles: wred_drop, wred-ge_y, wred_ge_g,
wred_teng_y, wred_teng_.
Defaults
none
Command
Modes
QOS-POLICY-OUT mode
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.2.1.0
Profile name character limit increased from 16 to 32.
6.1.1.1
Introduced on the .E-Series
Usage
Information
To assign drop precedence to green or yellow traffic, use this command. If there is
no honoring enabled on the input, all the traffic defaults to green drop precedence.
1524
Quality of Service (QoS)
