route-map
map-name
(OPTIONAL) Enter the keyword
route-map
then the name
of a configured route map.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage
Information
If you apply a route map to a BGP peer or neighbor with the
neighbor default-
originate
command configured, the software does not apply the set filters in the
route map to that BGP peer or neighbor.
neighbor description
Assign a character string describing the neighbor or group of neighbors (peer group).
Z9500
Syntax
neighbor {
ip-address
|
peer-group-name
} description
text
To delete a description, use the
no neighbor {
ip-address
|
peer-group-
name
} description
command.
Parameters
ip-address
Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name
Enter the name of the peer group.
text
Enter a continuous text string up to 80 characters.
Defaults
Not configured.
Command
Modes
ROUTER BGP
412
Border Gateway Protocol
