mac access-group
Apply a MAC ACL to traffic entering or exiting an interface. You can apply a MAC ACL on a physical, port-
channel, or VLAN interface.
Z9500
Syntax
mac access-group
access-list-name
{in [vlan
vlan-range
] | out}
To delete a MAC access-group, use the
no mac access-group
mac-list-
name
command.
Parameters
access-list-
name
Enter the name of a configured MAC access list, up to 140
characters.
vlan
vlan-range
(OPTIONAL) Enter the keyword
vlan
and then enter a range
of VLANs. The range is from 1 to 4094 (you can use IDs 1 to
4094).
NOTE: This option is available only with the keyword
in
option.
in
Enter the keyword
in
to configure the ACL to filter incoming
traffic.
out
Enter the keyword
out
to configure the ACL to filter
outgoing traffic.
Defaults
none
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.8.1.0
Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
7.6.1.0
Introduced on the S-Series.
Access Control Lists (ACL)
275
