debug ntp
Display network time protocol (NTP) transactions and protocol messages for troubleshooting.
Z9500
Syntax
debug ntp {adjust | all | authentication | events | loopfilter
| packets | select | sync}
To disable debugging of NTP transactions, use the
no debug ntp {adjust |
all | authentication | events | loopfilter | packets | select |
sync}
command.
Parameters
adjust
Enter the keyword
adjust
to display information on NTP
clock adjustments.
all
Enter the keyword
all
to display information on all NTP
transactions.
authentication
Enter the keyword
authentication
to display information
on NTP authentication transactions.
events
Enter the keyword
events
to display information on NTP
events.
loopfilter
Enter the keyword
loopfilter
to display information on
NTP local clock frequency.
packets
Enter the keyword
packets
to display information on NTP
packets.
select
Enter the keyword
select
to display information on the NTP
clock selection.
sync
Enter the keyword
sync
to display information on the NTP
clock synchronization.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
System Time and Date
1789
