Parameters
neighbor
ip-
address
|
peer-
group-name
Enter the keyword
neighbor
followed by one of the options
listed below:
•
ip-address
of the neighbor in IP address format of the
neighbor.
•
peer-group-name
of the neighbor peer group.
restart-time
seconds
Enter the keywords
restart-time
followed by the
maximum number of seconds needed to restart and bring up
all peers. The range is 1 to 3600 seconds. The default is
120
seconds
.
stale-path-time
seconds
Enter the keywords
stale-path-time
followed by the
maximum number of seconds to wait before restarting a
peer’s stale paths. The default is
360 seconds
.
role receiver-
only
Enter the keywords
role receiver-only
to designate the
local router to support graceful restart as a receiver only.
Defaults
As above.
Command
Modes
ROUTER BGP
Command
History
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.2.1.0
Introduced on the E-Series ExaScale.
7.4.1.0
Introduced
Usage
Information
This feature is advertised to BGP neighbors through a capability advertisement. In
Receiver Only mode, BGP saves the advertised routes of peers that support this
capability when they restart.
bgp log-neighbor-changes
Enable logging of BGP neighbor resets.
Z9500
Syntax
bgp log-neighbor-changes
To disable logging, use the
no bgp log-neighbor-changes
command.
Defaults
Enabled.
Command
Modes
ROUTER BGP
Border Gateway Protocol
515
