Version
Description
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series and E-Series.
Related
Commands
debug lldp interface
— debugs LLDP.
show lldp neighbors
— displays the LLDP neighbors.
show running-config lldp
— displays the LLDP running configuration.
advertise med streaming-video
To advertise streaming video services for broadcast or multicast-based video, configure the system. This
command does not include video applications that rely on TCP buffering.
Z9500
Syntax
advertise med streaming-video {
vlan-id layer2_priority
DSCP_value
} | {priority-tagged
number
}
To return to the default, use the
no advertise med streaming-video
{
vlan-id layer2_priority DSCP_value
} | {priority-tagged
number
}
command.
Parameters
vlan-id
Enter the VLAN ID. The range is from 1 to 4094.
layer2_priority
Enter the Layer 2 priority (C-Series and E-Series only). The
range is from 0 to 7.
DSCP_value
Enter the DSCP value (C-Series and E-Series only). The range
is from 0 to 63.
priority-tagged
number
Enter the keywords
priority-tagged
then the Layer 2
priority. The range is from 0 to 7.
Defaults
unconfigured.
Command
Modes
CONFIGURATION (conf-lldp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Link Layer Discovery Protocol (LLDP)
1195
