Parameters
process-id
Enter a number that corresponds to the OSPF process ID to
be redistributed. The range is from 1 to 65355.
metric
metric-
value
(OPTIONAL) The value used for the redistributed route. Use a
metric value that is consistent with the destination protocol.
The range is from 0 to 16777215. The default is
0
.
metric-type
{external |
internal}
(OPTIONAL) The external link type associated with the
default route advertised into a routing domain. The two
options are:
•
external
•
internal
level-1
(OPTIONAL) Routes are independently redistributed into IS-
IS as Level 1 routes.
level-1-2
(OPTIONAL) Routes are independently redistributed into IS-
IS as Level-1-2 routes.
level-2
(OPTIONAL) Routes are independently redistributed into IS-
IS as Level 2 routes. This setting is the default.
match {external
| internal}
(OPTIONAL) The command used for OSPF to route and
redistribute into other routing domains. The values are
•
internal
•
external
route-map
map-name
map-name
is an identifier for a configured route map. The
route map should filter imported routes from the source
routing protocol to the current routing protocol.
If you do not specify a map-name, all routes are
redistributed. If you specify a keyword, but fail to list route
map tags, no routes are imported.
Defaults
Refer to Parameters.
Command
Modes
• ROUTER ISIS (
for IPv4
)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6
)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
1110
Intermediate System to Intermediate System (IS-IS)
