port-vlan-id
Enter the keywords
port-vlan-id
to advertise the port
VLAN identification TLV.
vlan-name
Enter the keywords
vlan-name
to advertise the vlan-name
TLV. This keyword is only supported on the C-Series and S-
Series.
Defaults
Disabled.
Command
Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-
interface
-lldp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series. Added the
vlan-name
option.
7.6.1.0
Introduced on the C-Series.
7.4.1.0
Introduced on the E-Series.
Related
Commands
protocol lldp (Configuration)
— enables LLDP globally.
debug lldp interface
— debugs LLDP.
show lldp neighbors
— displays the LLDP neighbors.
show running-config lldp
— displays the LLDP running configuration.
advertise dot3-tlv
Advertise dot3 TLVs (Type, Length, Value).
Z9500
Syntax
advertise dot3-tlv {max-frame-size}
To remove advertised dot3-tlv, use the
no advertise dot3-tlv {max-frame-
size}
command.
Link Layer Discovery Protocol (LLDP)
1175
