Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Added support for Multi-Process OSPF.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.1
Introduced on the E-Series.
Usage
Information
The following describes the
show ip ospf
process-id
database external
command shown in the following example.
Field
Description
LS Age
Displays the LSA’s age.
Options
Displays the optional capabilities available on router. The
following options can be found in this item:
• TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
• DC or No DC is displayed depending on whether the
originating router can support OSPF over demand
circuits.
• E or No E is displayed on whether the originating router
can accept AS External LSAs.
LS Type
Displays the LSA’s type.
Link State ID
Displays the Link State ID.
Advertising Router Identifies the router ID of the LSA’s originating router.
LS Seq Number
Identifies the link state sequence number. This number
enables you to identify old or duplicate LSAs.
Checksum
Displays the Fletcher checksum of the LSA’s complete
contents.
Length
Displays the length in bytes of the LSA.
Network Mask
Displays the network mask implemented on the area.
Metrics Type
Displays the external type.
1304
Open Shortest Path First (OSPFv2 and OSPFv3)
