BGP graceful restart is active only when the neighbor becomes established.
Otherwise it is disabled. Graceful-restart applies to all neighbors with established
adjacency.
bgp log-neighbor-changes
Enable logging of BGP neighbor resets.
Z9500
Syntax
bgp log-neighbor-changes
To disable logging, use the
no bgp log-neighbor-changes
command.
Defaults
Enabled
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.11.1
Introduced on the Z9000.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage
Information
To view BGP neighbor resets, use the
show logging
command in EXEC mode.
The
bgp log-neighbor-changes
command appears in the
show config
command output.
Related
Commands
show logging
— views logging settings and system messages logged to the system.
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems.
Z9500
Syntax
bgp non-deterministic-med
To return to the default, use the
no bgp non-deterministic-med
command.
Border Gateway Protocol
381
