Usage
Information
Allocate at least one FP block to
ipmacacl
before you can enable IP+MAC Source
Address Validation.
1.
Use the
cam-acl l2acl
command from CONFIGURATION mode.
2.
Save the running-config to the startup-config.
3.
Reload the system.
ipv6 helper-address
Configures the ipv6 DHCP helper addresses without VRF.
Syntax
[no] ipv6 helper-address
ipv6-address
To delete the ipv6 helper address, use the
[no] ipv6 helper-address
ipv6-
address
command.
Parameters
ipv6-address
Enter the keyword
ipv6–address
through which the server
address can be reached.
Default
Disabled.
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S4810, S4820T, S6000, S6000–ON,
Z9000, and Z9500.
Usage
Information
Use this command on the interfaces where the DHCP clients are connected to
forward the packets from clients to DHCP server and vice-versa.
Example
Dell(conf-if-te-0/0)#ipv6 helper-address
X:X:X:X::X IPv6 helper address
VRF VRF name.
Global Global address space
Dynamic Host Configuration Protocol (DHCP)
735
