Usage
Information
There are eight queues per interface on the Z9500. This command assigns a class
map or QoS policy to different queues.
Related
Commands
class-map
— identifies the class map.
service-policy input
— applies an input policy map to the selected interface.
service-policy output
— applies an output policy map to the selected interface.
set
Mark outgoing traffic with a differentiated service code point (DSCP) or dot1p value.
Z9500
Syntax
set {ip-dscp
value
| mac-dot1p
value
}
Parameters
ip-dscp
value
(OPTIONAL) Enter the keywords
ip-dscp
then the IP DSCP
value. The range is from 0 to 63.
mac-dot1p
value
Enter the keywords
mac-dot1p
then the dot1p value. The
range is from 0 to 7.
Defaults
none
Command
Modes
CONFIGURATION (conf-qos-policy-in)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.2.1.0
Added
mac-dot1p
on the C-Series and S-Series.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
7.4.1.0
E-Series Only: Added support for
mac-dot1p
.
6.1.1.1
Introduced on the E-Series.
Quality of Service (QoS)
1509
