show ip ospf neighbor
Display the OSPF neighbors connected to the local router.
Z9500
Syntax
show ip ospf
process-id
neighbor
Parameters
process-id
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Added support for Multi-Process OSPF.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.1
Introduced on the E-Series.
Usage
Information
The following describes the
show ip ospf
process-id
neighbor
command
shown in the following example.
Item
Description
Neighbor ID
Displays the neighbor router ID.
Pri
Displays the priority assigned neighbor.
State
Displays the OSPF state of the neighbor.
Dead Time
Displays the expected time until the system declares the
neighbor dead.
Address
Displays the IP address of the neighbor.
Interface
Displays the interface type slot/port information.
Area
Displays the neighbor’s area (process ID).
Open Shortest Path First (OSPFv2 and OSPFv3)
1321
