Version
Description
7.4.1.0
Introduced on the E-Series.
management-interface
Enable and configure LLDP protocol parameters on the management interface.
Z9500
Syntax
management-interface
To remove LLDP configuration on a management interface, use the
no
management-interface
command.
Command
Modes
LLDP (conf-lldp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
9.2(0.0)
Introduced on the Z9000 and S4810.
Usage
Information
To enable LLDP on the management interface, use the
no disable
command in
LLDP-MANAGEMENT-INTERFACE mode (conf-lldp-mgmtIf).
mode
To receive or transmit, set LLDP.
Z9500
Syntax
mode {tx | rx}
To return to the default, use the
no mode {tx | rx}
command.
Parameters
tx
Enter the keyword
tx
to set the mode to transmit.
rx
Enter the keyword
rx
to set the mode to receive.
Defaults
Both
transmit
and
receive
.
Command
Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-
interface
-lldp)
Link Layer Discovery Protocol (LLDP)
1183
