•
: use the server(s) configured with the
tacacs-server host
command.
... method2
(OPTIONAL) In the event of a “no response” from the first
method, the system applies the next configured method.
Defaults
Use the
enable
password.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.2.1.0
Introduced on the E-Series.
Usage
Information
By default, the
Enable password
is used. If you configure
aaa authentication
enable default
, the system uses the methods defined for
Enable access
instead.
Methods configured with the
aaa authentication enable
command are
evaluated in the order they are configured. If authentication fails using the primary
method, the system employs the second method (or third method, if necessary)
automatically. For example, if the server is reachable, but the server key
is invalid, the system proceeds to the next authentication method. The is
incorrect, but the user is still authenticated by the secondary method.
Related
Commands
enable password
— changes the password for the
enable
command.
login authentication
— enables AAA login authentication on the terminal lines.
password
— creates a password.
radius-server host
— specifies a RADIUS server host.
tacacs-server host
— specifies a server host.
Security
1611
