Version
Description
7.5.1.0
Introduced on the C-Series.
6.2.1.1
Introduced on the E-Series.
Usage
Information
When you enable
debug spanning-tree bpdu
for multiple interfaces, the
software only sends information on BPDUs for the last interface specified.
Related
Commands
protocol spanning-tree
— enters SPANNING TREE mode on the switch.
description
Enter a description of the spanning tree.
Z9500
Syntax
description {
description
}
To remove the description from the spanning tree, use the
no description
{
description
}
command.
Parameters
description
Enter a description to identify the spanning tree (80
characters maximum).
Defaults
none
Command
Modes
SPANNING TREE (The prompt is “config-stp”.)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced
Related
Commands
protocol spanning-tree
— enters SPANNING TREE mode on the switch.
Spanning Tree Protocol (STP)
1771
