Usage
Information
To view the total number of COMMUNITY attributes found, use the
show ip bgp
summary
command. The text line above the route table states the number of
COMMUNITY attributes found.
The
show ip bgp community
command without any parameters lists BGP
routes with at least one BGP community attribute and the output is the same as for
the
show ip bgp
command output.
Example
Dell#show run extcommunity-list
!
ip extcommunity-list ecl1
permit rt 100:4
permit soo 40:4
Dell#show ip bgp extcommunity-list ecl1
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf
Weight Path
*> 55.0.0.0/24
172.16.0.2 0 200 i
*> 77.0.0.0/24
172.16.0.2 0 200 i
Dell#show ip bgp extcommunity-list ec
% Error: Extended community list does not exist.
Dell#
show ip bgp filter-list
View the routes that match the filter lists.
Z9500
Syntax
show ip bgp [vrf
vrf-name
] [ipv4 {
multicast
|
unicast
} | ipv6
unicast
] filter-list
as-path-name
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword
vrf
and then the name of
the VRF to view route information that matches the filter lists
corresponding to that VRF.
ipv4
multicast
(OPTIONAL) Enter the keyword
ipv4
followed by the
keyword
multicast
to view information related only to ipv4
multicast routes.
ipv4
unicast
(OPTIONAL) Enter the keyword
ipv4
followed by the
keyword
unicast
to view information related only to ipv4
unicast routes.
462
Border Gateway Protocol
