Dell Networking Z9500, Command Reference Manual

Page: 308 / 1905

Version Description
6.1.1.0 Introduced on the E-Series.
Related
Commands set as-path — adds information to the BGP AS_PATH attribute.
match community
To match routes that have a certain COMMUNITY attribute in their BGP path, configure a filter.
Z9500
Syntax
match community community-list-name [exact]
To delete a community match filter, use the
no match community
command.
Parameters
community-
list-name Enter the name of a configured community list.
exact (OPTIONAL) Enter the keywords
exact
to process only
those routes with this community list name.
Defaults Not configured.
Command
Modes ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Related
Commands
ip community-list — configures an Community Access list.
set community — specifies a COMMUNITY attribute.
308
Access Control Lists (ACL)