Parameters
seconds
Enter the number of minutes. The range is from 0 to 35790.
The default is
240 minutes
.
Defaults
240 minutes
(4 hours)
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.2.1.1
Introduced on the E-Series.
Related
Commands
show interfaces
— displays the ARP timeout value for all available interfaces.
clear arp-cache
Clear the dynamic ARP entries from a specific interface or optionally delete (
no-refresh
) ARP entries
from the content addressable memory (CAM).
Z9500
Syntax
clear arp-cache [interface | ip
ip-address
] [no-refresh]
Parameters
interface
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For the Management interface, enter the keyword
ManagementEthernet
then the slot/port information.
The slot range is from 0 to 1 and the port range is 0.
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
928
IPv4 Routing
