Version
Description
9.7(0.0)
Introduced on the Z9500.
Usage
Information
To clear DCBX frame counters, use the
clear dcbx counters interface
stack-unit/port
command.
The following describes the
show interface dcbx detail
command shown in
the following example.
Field
Description
Interface
Interface type with chassis slot and port number.
Port-Role
Configured the DCBX port role: auto-upstream, auto-
downstream, config-source, or manual.
DCBX Operational
Status
Operational status (enabled or disabled) used to elect a
configuration source and internally propagate a DCB
configuration. The DCBX operational status is the
combination of PFC and ETS operational status.
Configuration
Source
Specifies whether the port serves as the DCBX configuration
source on the switch: true (yes) or false (no).
Local DCBX
Compatibility
mode
DCBX version accepted in a DCB configuration as
compatible. In auto-upstream mode, a port can only receive
a DCBX version supported on the remote peer.
Local DCBX
Configured mode
DCBX version configured on the port: CEE, CIN, IEEE v2.5,
or Auto (port auto-configures to use the DCBX version
received from a peer).
Peer Operating
version
DCBX version that the peer uses to exchange DCB
parameters.
Local DCBX TLVs
Transmitted
Transmission status (enabled or disabled) of advertised DCB
TLVs (see TLV code at the top of the show command
output).
Local DCBX
Status: DCBX
Operational
Version
DCBX version advertised in Control TLVs.
Local DCBX
Status: DCBX Max
Version Supported
Highest DCBX version supported in Control TLVs.
Local DCBX
Status: Sequence
Number
Sequence number transmitted in Control TLVs.
Local DCBX
Status:
Acknowledgement number transmitted in Control TLVs.
622
Data Center Bridging (DCB)
