Version
Description
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
Usage
Information
When you configure the
snmp-server trap-source
command, the system
messages logged to the history table are also sent to the SNMP network
management station.
Related
Commands
show logging
— displays information logged to the history buffer.
logging history size
Specify the number of messages stored in the logging history table.
Z9500
Syntax
logging history size
size
To return to the default values, use the
no logging history size
command.
Parameters
size
Indicate a value as the number of messages to be stored.
The range is from 0 to 500. The default is
1 message
.
Defaults
1 message
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
Simple Network Management Protocol (SNMP) and Syslog
1739
