Usage
Information
After you allocate FP blocks of CAM to ACL VLAN operation, you must reboot the
switch to enable ACL VLAN optimization.
The following table describes the output fields of the
show cam-acl-vlan
command:
Field
Description
Chassis Vlan Cam ACL
Details about the CAM blocks allocated
for ACLs for various VLAN operations at
a system-wide, global level.
Stack Unit <number>
Details about the CAM blocks allocated
for ACLs for various VLAN operations
for a particular stack unit.
Current Settings(in block sizes)
Information about the number of FP
blocks that are currently in use or
allocated.
VlanOpenFlow
Number of FP blocks for VLAN open
flow operations.
VlanIscsi
Number of FP blocks for VLAN internet
small computer system interface
(iSCSI) counters.
VlanHp
Number of FP blocks for VLAN high
performance processes.
VlanFcoe
Number of FP blocks for VLAN Fiber
Channel over Ethernet (FCoE)
operations.
VlanAclOpt
Number of FP blocks for ACL VLAN
optimzation feature.
Example
Dell#show cam-acl-vlan
-- Chassis Vlan Cam ACL --
Current Settings(in block sizes)
VlanOpenFlow : 0
VlanIscsi : 2
VlanHp : 1
VlanFcoe : 1
VlanAclOpt : 0
-- Stack unit 0 --
Current Settings(in block sizes)
VlanOpenFlow : 0
VlanIscsi : 2
VlanHp : 1
VlanFcoe : 1
VlanAclOpt : 0
Access Control Lists (ACL)
269
