Version
Description
9.7(0.0)
Introduced on S-Series and Z–Series.
Usage
Information
IGMP commands accept only non-VLAN interfaces — specifying VLAN does not
yield results.
debug ip igmp snooping
Enable debugging of IGMP snooping packets on interfaces and groups.
Z9500
Syntax
debug ip igmp snooping [
group
address |
interface
]
• To disable debugging of IGMP snooping, use the
no debug ip igmp
snooping [
group address
|
interface
]
command.
• To disable all debugging, use the
undebug all
command.
Parameters
snooping
Enter the keyword snooping to enable debugging of IGMP
snooping.
group-address
(OPTIONAL) Enter the IP multicast group address in dotted
decimal format.
interface
interface
Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a port channel interface, enter the keywords
port-
channel
then a number.
Defaults
Disabled.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, Z9000, and Z9500.
824
Internet Group Management Protocol (IGMP)
