When you enter the
switchport
command, the interface is automatically added
to the default VLAN.
To use the
switchport backup interface
command on a port, first enter the
switchport
command. For more information, refer to the “Configuring
Redundant Links” section in the “Layer 2” chapter of the
Dell Networking OS
Configuration Guide
.
Related
Commands
interface port-channel
— creates a port channel interface.
Egress Interface Selection (EIS) Commands
The following commands are Egress Interface Selection (EIS) commands.
application
Configure the management egress interface selection.
Z9500
Syntax
application {all |
application-type
}
To remove a management application configuration, use the
no application
{all |
application-type
}
command.
Parameters
application-
type
Enter any of the following keywords:
• For DNS, enter the keyword
dns
.
• For FTP, enter the keyword
ftp
.
• For NTP, enter the keyword
ntp
.
• For Radius, enter the keyword
radius
.
• For sFlow collectors, enter the keyword
sflow-
collector
.
• For SNMP (traps and MIB responses), enter the keywords
snmp
.
• For SSH, enter the keyword
ssh
.
• For Syslog, enter the keyword
syslog
.
• For TACACS, enter the keyword
tacacs
.
• For Telnet, enter the keyword
telnet
.
• For TFTP, enter the keyword
tftp
.
all
Configure all applications.
Interfaces
887
