default-information originate
To generate a default external route into an OSPF routing domain, configure the system.
Z9500
Syntax
default-information originate [always] [metric
metric-value
]
[metric-type
type-value
] [route-map
map-name
]
To return to the default values, use the
no default-information originate
command.
Parameters
always
(OPTIONAL) Enter the keyword
always
to specify that
default route information must always be advertised.
metric
metric-
value
(OPTIONAL) Enter the keyword
metric
then a number to
configure a metric value for the route. The range is from 1 to
16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords
metric-type
then an
OSPF link state type of 1 or 2 for default routes. The values
are:
• 1 = Type 1 external route
• 2 = Type 2 external route
route-map
map-name
(OPTIONAL) Enter the keywords
route-map
then the name
of an established route map.
Defaults
Disabled.
Command
Modes
ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Added support for the Multi-Process OSPF.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
1262
Open Shortest Path First (OSPFv2 and OSPFv3)
