igp
Enter the keyword
igp
to match routes originating within
the same AS.
incomplete
Enter the keyword
incomplete
to match routes with
incomplete routing information.
Defaults
Not configured.
Command
Modes
ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking TOS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
6.1.1.0
Introduced on the E-Series.
match route-type
To match routes based on the how the route is defined, configure a filter.
Z9500
Syntax
match route-type {external [type-1 | type-2] | internal |
level-1 | level-2 | local}
To delete a match, use the
no match route-type {local | internal |
external [type-1 | type-2] | level-1 | level-2}
command.
Parameters
external
[type-1| type-2]
Enter the keyword
external
then either type-1 or type-2 to
match only on OSPF Type 1 routes or OSPF Type 2 routes.
internal
Enter the keyword
internal
to match only on routes
generated within OSPF areas.
level-1
Enter the keyword
level-1
to match IS-IS Level 1 routes.
level-2
Enter the keyword
level-2
to match IS-IS Level 2 routes.
local
Enter the keyword
local
to match only on routes generated
within the switch.
Access Control Lists (ACL)
315
