Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.0
Introduced on the E-Series.
Usage
Information
Sequence numbers for this filter are automatically assigned starting at sequence
number 5.
If you do not use the
ge
or
le
options, only packets with an exact match to the
prefix are filtered.
Related
Commands
permit
— configures a filter to pass packets.
seq
— configures a drop or permit filter with a specified sequence number.
ip prefix-list
Enter the PREFIX-LIST mode and configure a prefix list.
Z9500
Syntax
ip prefix-list
prefix-name
To delete a prefix list, use the
no ip prefix-list
prefix-name
command.
Parameters
prefix-name
Enter a string up to 16 characters long as the name of the
prefix list, up to 140 characters long.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
298
Access Control Lists (ACL)
