peer-group-
name
Enter the name of the peer group.
prefix-list-
name
Enter the name of an established prefix list. If you do not
configure the prefix list, the default is
permit
(to allow all
routes).
in
Enter the keyword
in
to distribute only inbound traffic.
out
Enter the keyword
out
to distribute only outbound traffic.
Defaults
Not configured.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.2.1.0
Introduced on the E-Series ExaScale.
7.4.1.0
Introduced
Usage
Information
Other BGP filtering commands include the
neighbor filter-list
and
neighbor route-map
commands.
Related
Commands
•
neighbor filter-list
– assigns a AS-PATH list to a neighbor or peer group.
•
neighbor route-map
– assigns a route map to a neighbor or peer group.
neighbor ebgp-multihop
Attempt and accept BGP connections to external peers on networks that are not directly connected.
Z9500
Syntax
neighbor {
ipv6-address
|
peer-group-name
} ebgp-multihop [
ttl
]
To disallow and disconnect connections, use the
no neighbor {
ipv6-address
|
peer-group-name
} ebgp-multihop [
ttl
]
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Enter the name of the peer group.
ttl
(OPTIONAL) Enter the number of hops as the time to live (ttl)
value. The range is 1 to 255. The default is
255
.
Border Gateway Protocol
541
