Related
Commands
show ip bgp neighbors
– displays information on the BGP neighbors.
neighbor filter-list
Configure a BGP filter based on the AS-PATH attribute.
Z9500
Syntax
neighbor {
ipv6-address
|
peer-group-name
} filter-list
as-path-
name
{in | out}
To delete a BGP filter, use the
no neighbor {
ipv6-address
|
peer-group-
name
} filter-list
as-path-name
{in | out}
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Enter the name of the peer group to apply the filter to all
routers in the peer group.
as-path-name
Enter the name of an established AS-PATH access list. If you
do not configure the AS-PATH access list, the default is
permit
(to allow routes). The maximum is 16 characters.
in
Enter the keyword
in
to filter inbound BGP routes.
out
Enter the keyword
out
to filter outbound BGP routes.
Defaults
Not configured.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.2.1.0
Introduced on the E-Series ExaScale.
7.4.1.0
Introduced
neighbor maximum-prefix
Control the number of network prefixes received.
Z9500
Syntax
neighbor {
ipv6-address
|
peer-group-name
} maximum-prefix
maximum
[
threshold
] [warning-only]
Border Gateway Protocol
543
