Defaults
none
Command
Modes
CONFIGURATION (conf-lldp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
9.1.(0.0)
Modified to support management-address parameter.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
7.4.1.0
Introduced on the E-Series.
Usage
Information
The command options
management-address
,
system-capabilities
,
system-
description
, and
system-name
can be invoked individually or together, in any
sequence.
advertise management-tlv (Interface)
Advertise management type, length, values (TLVs) to the specified interface.
Z9500
Syntax
advertise management-tlv {management-address | system-
capabilities | system-description | system-name}
To remove advertised management TLVs, use the
no advertise management-
tlv {management-address | system-capabilities | system-
description | system-name}
command.
Parameters
management-
address
Enter the keywords
management-address
to advertise the
management IP address TLVs to the specified interface.
system-
capabilities
Enter the keywords
system-capabilities
to advertise the
system capabilities TLVs to the specified interface.
system-
description
Enter the keywords
system-description
to advertise the
system description TLVs to the specified interface.
system-name
Enter the keywords
system-name
to advertise the system
name TLVs to the specified interface.
Link Layer Discovery Protocol (LLDP)
1177
