permit bandwidth
Enables you to specify link band width extended-community attribute as the matching criteria to permit
incoming or outgoing traffic.
Syntax
permit bandwidth
To disable this setting, enter the
no permit bandwidth
command.
Parameters
bandwidth
Enter the keyword bandwidth to specify extended-
community attribute as the matching criteria for permitting
traffic. The range is from 0 to 102400.
Defaults
N/A
Command
Modes
EXTENDED COMMUNITY LIST
Command
History
Version
Description
9.7(0.0)
Introduced on the S-Series.
Related
Commands
deny bandwidth
– link band width extended-community attribute as the matching
criteria to deny incoming or outgoing traffic..
redistribute
Redistribute routes into BGP.
Z9500
Syntax
redistribute {connected | static} [route-map
map-name
]
To disable redistribution, use the
no redistribution {connected | static}
command.
Parameters
connected
Enter the keyword
connected
to redistribute routes from
physically connected interfaces.
static
Enter the keyword
static
to redistribute manually
configured routes.
These routes are treated as incomplete routes.
route-map
map-name
(OPTIONAL) Enter the keyword
route-map
then the name
of an established route map.
Only the following ROUTE-MAP mode commands are
supported:
Border Gateway Protocol
441
