Version
Description
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
7.2.1.0
Introduced.
Usage
Information
This command turns on BGP soft-reconfiguration inbound debugging. If no
neighbor is specified, debug turns on for all neighbors.
debug ip bgp updates
Allows you to view information about BGP updates.
Z9500
Syntax
debug ip bgp [vrf
vrf-name
] [
A.B.C.D
|
X:X:X:X::X
| peer-group
peer-group-name
] updates [in | out | prefix-list prefix-list-
name]
To disable debugging, use the
no debug ip bgp [
A.B.C.D
|
X:X:X:X::X
|
peer-group
peer-group-name
] updates [in | out | prefix-list
prefix-list-name]
command.
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to view BGP updates information corresponding to
that VRF.
A.B.C.D
(OPTIONAL) Enter an IPv4 address of the neighbor.
X:X:X:X::X
(OPTIONAL) Enter an IPv6 address.
peer-group
peer-group-
name
(OPTIONAL) Enter the keyword
peer-group
followed by the
name of the peer group.
in
(OPTIONAL) Enter the keyword
in
to view only BGP updates
received from neighbors.
out
(OPTIONAL) Enter the keyword
out
to view only BGP
updates sent to neighbors.
prefix-list
prefix-list-
name
(OPTIONAL) Enter the keyword
prefix-list
then the
name of an established prefix list. If the prefix list is not
configured, the default is
permit
(to allow all routes).
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
Border Gateway Protocol
401
