Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
9.2(0.0)
Modified the
drops
keyword range, unit keyword
range
and added the
buffer
and
cpu management
statistics
options.
8.3.19.0
Introduced on the S4820T.
8.3.11.5
Added i2c statistics and sata-interfaces statistics.
8.3.11.4
Added user port information.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series.
Usage
Information
Use the
remote-exec
command to remotely execute a command on the Route
Processor and line-card (LP) processor from the Control Processor.
Related
Commands
show hardware
— displays information on hardware components.
show control-traffic
Display information about the control traffic transmitted on a Z9500 CPU: Route Processor, Control
Processor, or line card.
Syntax
show control—traffic {cp | rp | linecard
slot-id
} counters
Parameters
cp
Enter the keyword
cp
to display control-traffic information
from the Control Processor CPU.
rp
Enter the keyword
rp
to display control-traffic information
from the Route Processor CPU.
linecard
slot-id
Enter the
linecard
slot-id
parameters to display
control-traffic information from the specified line-card
processor. The range of Z9500 slot IDs is from 0 to 2.
Defaults
None.
Debugging and Diagnostics
667
