Version
Description
8.3.19.0
Introduced on the S4820T.
8.3.10.0
Introduced on the S4810.
8.4.1.0
Introduced on E-Series ExaScale, C-Series, and S-Series.
Support was added for IPv6 VRRP groups in non-default
VRF instances.
8.3.2.0
Introduced on the E-Series TeraScale.
debug vrrp ipv6
Allows you to enable debugging of VRRP.
Z9500
Syntax
debug vrrp ipv6
interface
[
vrid
] {all | packets | state |
timer}
Parameters
interface
Enter the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keywords
port-
channel
then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN interface, enter the keyword
vlan
then the
VLAN ID. The VLAN ID range is from 1 to 4094.
vrid
(OPTIONAL) Enter a number from 1 to 255 as the VRRP
group ID.
all
Enter the keyword
all
to enable debugging of all VRRP
groups.
bfd
Enter the keyword
bfd
to enable debugging of all VFFP BFD
interactions.
database
Enter the keyword
database
to display changes related to
group, prefix, and interface entries in the VRRP table.
packets
Enter the keyword
packets
to enable debugging of VRRP
control packets.
state
Enter the keyword
state
to enable debugging of VRRP state
changes
timer
Enter the keyword
timer
to enable debugging of the VRRP
timer.
Virtual Router Redundancy Protocol (VRRP)
1901
