Example
Dell# upgrade system tftp://10.11.8.12/dv-rainier-13 a:
00:39:32 : Discarded 1 pkts. Expected block num : 51. Received
block num: 50
!00:39:36 : Discarded 1 pkts. Expected block num : 65.
Received block num: 64
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!...................................................
...............................................................
...............................................................
.............!
93924044 bytes successfully copied
System image upgrade completed successfully.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!
Image upgraded to all
verify
Validate the software image on the flash drive after the image has been transferred to the system, but
before the image has been installed.
Syntax
verify
{
md5
|
sha256
}[
flash
:// ]
img-file
[
hash-value
]
Parameters
md5
Enter the
md5
keyword to use the MD5 message-digest
algorithm.
sha256
Enter the
sha256
keyword to use the SHA256 Secure Hash
Algorithm
flash://
(Optional). Enter the
flash://
keyword. The default is to
use the flash drive. You can just enter the image file name.
img-file
Enter the name the Dell Networking software image file to
validate.
hash-value
(Optional). Enter the relevant hash published on i-Support.
Default
flash drive
Command
Modes
EXEC mode
Command
History
Version
Description
9.5(0.1)
Introduced on the Z9500.
File Management
85
