Related
Commands
ip access-list extended cpu-qos
— creates an extended IP ACL for CoPP.
mac access-list extended cpu-qos
— creates an extended MAC ACL for CoPP.
class-map cpu-qos
— creates a QoS class map for CoPP.
qos-policy-input cpu-qos
— creates a QoS input-policy map for CoPP.
policy-map-input cpu-qos
— creates an input-policy map for CoPP.
show control-traffic protocol
Display per-protocol counters of rate-limited control-plane traffic.
Z9500
Syntax
show contol—traffic protocol [cp—switch | linecard
slot-id
portset
port-pipe
] counters
Parameters
cp-switch
Enter the keyword
cp-switch
to display counters for rate-
limited traffic on the central switch (aggregated CoPP).
linecard
slot-id
portset
port-
pipe
Enter the slot ID and port pipe to display counters for rate-
limited traffic on a specified Z9500 line card and port set.
The range of Z9500 slot IDs is from 0 to 2. The range of
port-pipe numbers is: 0 to 2 on line card 0; 0 to 3 on line
cards 1 and 2.
Defaults
None
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
Usage
Information
There are three line cards (0-2) with fixed ports on the Z9500. Line card 0 uses
three sets of ports (port pipes): 0 to 2; line cards 1 and 2 use four sets of ports: 0 to
3.
In the
show control-traffic protocol
output, RxBytes displays the number
of bytes of control-plane traffic received on which protocol-based rate limiting is
594
Control Plane Policing (CoPP)
