Version
Description
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
pre- 6.2.1.1
Introduced on the E-Series.
Usage
Information
If you want the interface to receive both versions of RIP, use the
ip rip receive
version 1 2
command.
Related
Commands
ip rip send version
— sets the RIP version for sending RIP traffic on an interface.
version
— sets the RIP version the switch software uses.
ip rip send version
To send a specific version of RIP, set the interface. The version you set on the interface overrides the
version command in ROUTER RIP mode.
Z9500
Syntax
ip rip send version [1] [2]
To return to the default value, use the
no ip rip send version
command.
Parameters
1
(OPTIONAL) Enter the number
1
for RIP version 1. The
default is RIPv1.
2
(OPTIONAL) Enter the number
2
for RIP version 2.
Defaults
RIPv1
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
Routing Information Protocol (RIP)
1543
