Version
Description
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.8.0
Introduced on the S4810.
OSPFv3 Commands
The fundamental mechanisms of OSPF (flooding, DR election, area support, SPF calculations, and so on)
remain unchanged. However, OSPFv3 runs on a per-link basis instead of on a per-IP-subnet basis. Most
changes were necessary to handle the increased address size of IPv6.
The Dell Networking implementation of OSPFv3 is based on IETF RFC 2740.
area authentication
Configure an IPsec authentication policy for OSPFv3 packets in an OFSPFv3 area.
Z9500
Syntax
area
area-id
authentication ipsec spi
number
{MD5 | SHA1} [key-
encryption-type] key
Parameters
area
area-id
Area for which OSPFv3 traffic is to be authenticated. For
area-id, you can enter a number.
The range is from 0 to 4294967295.
ipsec spi
number
Security Policy index (SPI) value that identifies an IPsec
security policy.
The range is from 256 to 4294967295.
MD5 | SHA1
Authentication type: Message Digest 5 (MD5) or Secure Hash
Algorithm 1 (SHA-1).
key-
encryption-
type
(OPTIONAL) Specifies if the key is encrypted.
The values are 0 (key is not encrypted) or 7 (key is
encrypted).
key
Text string used in authentication.
Open Shortest Path First (OSPFv2 and OSPFv3)
1333
