Parameters
master
Enter the keyword
master
to set the Ring node to Master
mode.
transit
Enter the keyword
transit
to set the Ring node to Transit
mode.
Defaults
Mode None
Command
Modes
CONFIGURATION (conf-frrp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.2.1.0
Introduced on the C-Series.
7.4.1.0
Introduced.
protocol frrp
Enter the Resilient Ring Protocol and designate a ring identification.
Syntax
protocol frrp {
ring-id
}
To exit the ring protocol, use the
no protocol frrp {
ring-id
}
command.
Parameters
ring-id
Enter the ring identification number. The range is from 1 to
255.
Defaults
none
Command
Modes
CONFIGURATION
Force10 Resilient Ring Protocol (FRRP)
787
