show ip bgp neighbors
— views BGP neighbors configurations.
neighbor peer-group (creating group)
Allows you to create a peer group and assign it a name.
Z9500
Syntax
neighbor
peer-group-name
peer-group
To delete a peer group, use the
no neighbor
peer-group-name
peer-group
command.
Parameters
peer-group-
name
Enter a text string up to 16 characters long as the name of
the peer group.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage
Information
When you create a peer group, it is disabled (Shut mode).
Related
Commands
neighbor peer-group (assigning peers)
— assigns routers to a peer group.
neighbor remote-as
— assigns a indirectly connected AS to a neighbor or peer
group.
neighbor shutdown
— disables a peer or peer group.
Border Gateway Protocol
425
