send
Send messages to one or all terminal line users.
Z9500
Syntax
send [*] | [line ] | [console] | [vty]
Parameters
*
Enter the asterisk character
*
to send a message to all tty
lines.
line
Send a message to a specific line. The range is from 0 to 11.
console
Enter the keyword
console
to send a message to the
primary terminal line.
vty
Enter the keyword
vty
to send a message to the virtual
terminal.
Defaults
none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.5.1.0
Introduced on the E-Series.
Usage
Information
Messages can contain an unlimited number of lines; however, each line is limited
to 255 characters. To move to the next line, use
<CR>
. To send the message use
CTR-Z
; to abort a message, use
CTR-C
.
Control and Monitoring
131
