dot1x max-eap-req
Configure the maximum number of times an extensive authentication protocol (EAP) request is
transmitted before the session times out.
Z9500
Syntax
dot1x max-eap-req
number
To return to the default, use the
no dot1x max-eap-req
command.
Parameters
number
Enter the number of times an EAP request is transmitted
before a session time-out. The range is from 1 to 10. The
default is
2
.
Defaults
2
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
7.6.1.0
Introduced on the C-Series and S-Series.
7.4.1.0
Introduced on the E-Series.
dot1x max-supplicants
Restrict the number of supplicants that can be authenticated and permitted to access the network
through the port. This configuration is only takes effect in Multi-Auth mode.
Z9500
Syntax
dot1x max-supplicants
number
802.1X
201
