Version
Description
9.7(0.0)
Introduced on the Z9500.
Usage
Information
This command is available at the global level only.
iscsi priority-bits
Configure the iSCSI priority advertised for the iSCSI protocol in application priority TLVs.
Syntax
iscsi priority-bits
priority-bitmap
To remove the configured iSCSI priority, use the
no iscsi priority-bits
command.
Parameters
priority-bitmap
Enter the priority-bitmap range. The range is from 1 to FF.
Defaults
0x10
Command
Modes
PROTOCOL LLDP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the Z9500.
Usage
Information
This command is available at the global level only.
show interface dcbx detail
Displays the DCBX configuration on an interface.
Syntax
show interface
port-type slot/port
dcbx detail
Parameters
port-type
Enter the port type.
slot/port
Enter the slot/port number.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Data Center Bridging (DCB)
621