To clear the MSDP rejected source-active entries, use the
no ip msdp cache-
rejected-sa {
number
}
command then the
ip msdp cache-rejected-sa
{
number
}
command.
Parameters
number
Enter the number of rejected SA entries to cache. The range
is from 0 to 32766.
Defaults
none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.5(0.1)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.4.1.0
Introduced
Related
Commands
show ip msdp sa-cache rejected-sa
ip msdp default-peer
Define a default peer from which to accept all source-active (SA) messages.
Z9500
Syntax
ip msdp default-peer
peer address
[list
name
]
To remove the default peer, use the
no ip msdp default-peer {
peer
address
} list
name
command.
Parameters
peer address
Enter the peer address in a dotted decimal format (A.B.C.D.)
list
name
Enter the keywords
list name
and specify a standard
access list that contains the RP address that should be
treated as the default peer. If no access list is specified, then
all SAs from the peer are accepted.
1220
Multicast Source Discovery Protocol (MSDP)
