policer=
statistics={stat id 63 slice = 3 idx=0 entries=1}
{Packets}
EID 0x000010cc: gid=0x10,
slice=3, slice_idx=0x2, part =0 prio=0x10cc,
flags=0x10202, Installed, Enabled
tcam: color_indep=0,
DstMac
Offset: 90 Width: 48
DATA=0x00000180 c2000000
MASK=0x0000ffff ff000000
StageEgress
action={act=DropCancel, param0=0(0), param1=0(0),
param2=0(0), param3=0(0)}
policer=
statistics={stat id 65 slice = 3 idx=1 entries=1}
{Packets}
--More--
show hardware layer3
Display Layer 3 ACL or QoS data for a Z9500 line card and port pipe.
Z9500
Syntax
show hardware layer3 {acl | qos} linecard
slot-id
port-set
port-pipe
Parameters
acl | qos
Enter either the keyword
acl
or the keyword
qos
to select
between ACL or QoS data.
linecard
slot-id
Enter the
linecard
slot-id
parameters to specify a
Z9500 line card. The range of slot IDs is from 0 to 2.
port-set
port-
pipe
Enter the keywords
port-set
port-pipe
parameters to
specify a port pipe (set of ports) on a line card. The range of
port-pipe numbers is: 0 to 2 on line card 0; 0 to 3 on line
cards 1 and 2.
Defaults
none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
692
Debugging and Diagnostics
