Dell Networking Z9500, Command Reference Manual

Page: 1717 / 1905

The default is 1 .
auth (OPTIONAL) Enter the keyword
auth
to specify
authentication of a packet without encryption.
noauth (OPTIONAL) Enter the keyword
noauth
to specify no
authentication of a packet.
priv (OPTIONAL) Enter the keyword
priv
to specify both
authentication and then scrambling of the packet.
read name (OPTIONAL) Enter the keyword
read
then a name (a string
of up to 20 characters long) as the read view name. The
default is
GlobalView and is assumed to be every object
belonging to the internet (1.3.6.1) OID space.
write name (OPTIONAL) Enter the keyword
write
then a name (a string
of up to 20 characters long) as the write view name.
notify name (OPTIONAL) Enter the keyword
notify
then a name (a
string of up to 20 characters long) as the notify view name.
access access-
list-name
(Optional) Enter the standard IPv4 access list name (a string
up to 16 characters long).
ipv6 access-
list-name
(Optional) Enter the keyword
ipv6
then the IPv6 access list
name (a string up to 16 characters long).
access-list-
name
ipv6
access-list-
name
(Optional) Enter both an IPv4 and IPv6 access list name.
Defaults As above.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.2 Added support for the
access
parameter.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Simple Network Management Protocol (SNMP) and Syslog
1717