Dell Networking Z9500, Command Reference Manual

Page: 1638 / 1905

port number (OPTIONAL) Enter the keyword
port
then a number as the
port to be used by the server. The range is from
zero (0) to 65535. The default is
49 .
timeout
seconds
(OPTIONAL) Enter the keyword
timeout
then the number of
seconds the switch waits for a reply from the
server. The range is from 0 to 1000. The default is
10
seconds .
key key
(OPTIONAL) Enter the keyword
key
then a string up to 42
characters long as the authentication key. This
authentication key must match the key specified in the
tacacs-server key
for the daemon.
Defaults Not configured.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Added support for IPv6.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Authentication key length increased to 42 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage
Information
To list multiple servers to be used by the
aaa authentication login
command, configure this command multiple times.
If you are not configuring the switch as a server, you do not need to
configure the
port
,
timeout
and
key
optional parameters. If you do not
configure a key, the key assigned in the
tacacs-server key
command is used.
Related
Commands
aaa authentication login — specifies the login authentication method.
1638
Security