Version
Description
6.1.1.1
Introduced on the E-Series.
Usage
Information
To configure the minimum and maximum threshold values for user-defined
profiles, use this command. Additionally, to modify the minimum and maximum
threshold values for the pre-defined WRED profiles, use this command. If you
delete the threshold values of the pre-defined WRED profiles, the profiles revert to
their original default values.
Pre-Defined WRED Profile
Name
Minimum Threshold
Maximum Threshold
wred_drop
0
0
wred_ge_y
1024
2048
wred_ge_g
2048
4096
wred_teng_y
4096
8192
wred_teng_g
8192
16384
Related
Commands
wred-profile
— creates a WRED profile.
trust
Specify dynamic classification (DSCP) or dot1p to trust.
Z9500
Syntax
trust {diffserv [fallback]| dot1p [fallback]}
Parameters
diffserv
Enter the keyword
diffserv
to specify trust of DSCP
markings.
dot1p
Enter the keyword
dot1p
to specify trust dot1p
configuration.
fallback
Enter the keyword
fallback
to classify packets according
to their DSCP value as a secondary option in case no match
occurs against the configured class maps.
Defaults
none
Command
Modes
CONFIGURATION (conf-policy-map-in)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
1522
Quality of Service (QoS)
