Dell Networking Z9500, Command Reference Manual

Page: 938 / 1905

Version Description
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.3.1.0 Added the
count
option.
Example
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
Usage
Information
To stop packets from flooding the user terminal when debugging is turned on, use
the
count
option.
debug ip packet
View a log of IP packets sent and received.
Z9500
Syntax
debug ip packet [access-group name ] [count value ] [ interface ]
To disable debugging, use the
no debug ip packet [access-group name ]
[count value ] [ interface ]
command.
Parameters
access-group
name
Enter the keyword
access-group
then the access list name
(maximum 16 characters) to limit the debug output based on
the defined rules in the ACL.
count value (OPTIONAL) Enter the keyword
count
then the count value.
The range is from 1 to 65534. The default is
Infinity
.
interface (OPTIONAL) Enter the following keywords and slot/port or
number information:
• For the Management interface, enter the keyword
ManagementEthernet
then the slot/port information.
The slot range is from 0 to 1 and the port range is 0.
• For a Port Channel interface, enter the keywords
port-
channel
then a number. For the C-Series and S-Series,
the range is from 1 to 128.
938
IPv4 Routing