description
Enter a description of the RIP routing protocol.
Z9500
Syntax
description {
description
}
To remove the description, use the
no description {
description
}
command.
Parameters
description
Enter a description to identify the RIP protocol (80
characters maximum).
Defaults
none
Command
Modes
ROUTER RIP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
7.7.1.0
Introduced on the E-Series.
Related
Commands
router rip
— enters ROUTER mode on the switch.
Routing Information Protocol (RIP)
1537
